The open flash point testerunder UHV power can help many power workers conduct various power tests more conveniently.

The open flash point tester adopts microcomputer technology and a large screen LCD display. The instrument heats up, automatically raises and lowers, automatically ventilates, automatically ignites, automatically displays, automatically locks the flash point value, and automatically prints the results according to standard methods. After testing, it can automatically cool down, achieving full automation of the working process. The automatic open flash point tester has the advantages of accurate measurement, good repeatability, stable performance, and simple operation. It has a wide range of applications in petroleum, chemical, light industry, and power industries.

The flash point value and ignition point value are used to indicate the presence of highly volatile or flammable substances in relatively non-volatile or flammable substances, and are important parameters for the transportation, storage, operation, and safety management of petroleum products; The open flash point tester is an instrument used to analyze and test petroleum products at the lowest temperature when the steam heated to it comes into contact with the flame and flashes instantly under specified conditions. The terms "measuring device, analyzer, analyzer, and measuring instrument" can be divided into open flash point measuring instrument and closed flash point measuring instrument.

Operation steps of open flash point tester:

1. The open flash point tester must be connected to the "contactless switch" or "limit switch" three wires (connected to the "counting" socket); The "power" socket should be connected to a three-phase 380V power supply, and the neutral wire must be properly connected after the work is done.

2. Move the "preset" dial above. The number of hits can be set from 01 to 99 as needed.

3. After pressing the "set number" button, the preset number will be displayed in the window.

4. Press the "power on" button, and the motor should rotate. After reaching the number of compaction times, the window should display "00" and automatically stop.

5. After starting up the open flash point tester, if it is not necessary to compact to "00", you can press the "stop" button at any time, and the motor can stop immediately. The next time you start hitting real-time, you can repeat the above steps.